Nautique Crossover 90490 Manuel d'utilisateur télécharger pdf (Page 163)

8-9

Care and Maintenance

5. Close the ball valve of step 2 unless the boat is on a trailer or

lifted up in the air, in which case it should be left open.

6. Run the engine for several minutes after it has reached the

normal operating temperature to ensure proper flushing.

7. Reduce the engine speed to idle, shut off the engine and

immediately shut off the water supply hose. Please note, failure

to shut off the water supply hose immediately could possibly

result in engine damage.

8. If the ball valve of step 5 was closed, open it now and close the

step 1 ball valve.

9. Remove the water supply hose and reinstall the deck fitting cap

securely.

Battery Maintenance

Take care when connecting or disconnecting a battery charger. Be

sure the charger is turned off and unplugged from power source

when you clip on/off the connecting clamps.

Make sure you have a solid connection with the charging clamps.

Poor connections are common causes of electrical arcs and engine

problems. Follow instructions.

Explosion or fire hazard from vented

fumes can cause death or serious injury.

• Wear eye protection and rubber gloves when working

on or around batteries.

• DO NOT charge or use a battery booster to start your

engine.

• Charge the battery outside of the boat.

• DO NOT smoke or bring a flame near a battery at any

time.

• DO NOT have your head directly above a battery when

making or breaking electrical connections.

• DO NOT use a metal object to spark between battery

posts to check if the battery is charged.

216V_226 Sec 8_2009.qxd:Naut Air Sec 8.qxd 2/16/09 4:11 PM Page 8-9

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 197 198

Pas de commentaire

Nautique Crossover 90490 Manuel d'utilisateur Page 163