Nautique Crossover 90490 Manuel d'utilisateur télécharger pdf (Page 162)

Section 8

8-8

Salt Water Boating

NOTICE

If you use your boat in salt water or other unusual water

conditions, fresh water flush your engine and cooling system with

freshwater.

Nautique offers an optional fresh water flush kit. This is the only

system we recommend if you use your boat in salt water or unusual

water conditions. Flushing the system by running the boat in fresh

water is another good way to flush the engine, but it must be done

immediately.

Freshwater Flushing Kit-

Optional

The optional freshwater flushing kit allows you to flush the water

system after your boat is operated in salt water, brackish water or

unusual water conditions.

We recommend using this system if you use your boat in salt water

or unusual water conditions. Flushing the system by running the

boat in fresh water is another good way to flush the engine, but it

must be done immediately.

DO NOT connect the flushing kit to a water source which exceeds

normal municipality water pressure.

Proper Use of Freshwater Flushing Kit

1. Open the ball valve located between the system’s deck fitting

and main engine cooling water supply hose.

2. Make sure that the ball valve located in the main cooling system

supply hose is open. This valve is located near the hull inlet

fitting.

3. Open the cap of the system deck fitting and properly connect a

water supply hose, making sure the connection is secure.

4. Turn on the hose and start the engine.

216V_226 Sec 8_2009.qxd:Naut Air Sec 8.qxd 2/16/09 4:11 PM Page 8-8

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 197 198

Pas de commentaire

Nautique Crossover 90490 Manuel d'utilisateur Page 162